Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
![background image](/toyota/camry_wagon/v6-180.5_2959cc_3.0l_dohc_(3vz-fe)/Page-505001.png)
Vehicle Speed Sensor: Testing and Inspection
Inspection
Speed Sensor Check
1.
Connect battery positive to terminal 1 and negative to terminal 2.
2.
Connect tester positive to terminal 3 and negative to terminal 2.
3.
Rotate shaft. Check that there is voltage change from 0V to 11V or more between terminals 2 and 3.
4.
Voltage change should be 20 times per revolution of speed sensor shaft.
5.
If not as specified, replace sensor.