Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
![background image](/toyota/camry_wagon/v6-180.5_2959cc_3.0l_dohc_(3vz-fe)/Page-1182001.png)
Ball Joint: Testing and Inspection
1.
Remove ball joint.
2.
Move ball joint stud back and forth five times, then install nut.
3.
Using torque wrench, turn nut continuously one turn every 2-4
seconds and take torque reading on fifth turn.
4.
If torque reading is not 9-29 in. lb, replace ball joint.