Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
/Page-882008.png)
4. INSTALL SNAP RING
Be sure end gap of the snap ring is not aligned with the groove of the clutch drum.
5. INSTALL BEARING AND RACE
a. Coat the bearing with petroleum jelly and install it facing the race side downward to the clutch drum.
Bearing outer diameter: 46.3 mm (1.823 in.)
Bearing inner diameter: 26.2 mm (1.031 in.)
b. Coat the race with petroleum jelly and install it to the case.
Race outer diameter: 43.0 mm (1.693 in.)
Race inner diameter: 24.5 mm (0.965 in.)