Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
HINT: Each bolt length (mm, in.) is indicated in the figure.
7. INSTALL AND FINGER TIGHTEN BOLT LOWER VALVE BODY
HINT: Bolt length (mm, in.) is indicated in the figure.
8. INSTALL CHECK BALLS
Install the two check balls into the lower valve body.
9. INSTALL LOWER VALVE BODY COVER GASKET AND NO.2 PLATE
Position a new gasket and plate and then another never gasket.
HINT: Both gaskets are same one.
10. INSTALL LOWER VALVE BODY COVER