Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
3. (TOYOTA TYPE)
REMOVE INBOARD AND OUTBOARD JOINT BOOT CLAMPS
-
Using a screwdriver, remove the inboard and outboard joint clamps.
(GKN TYPE)
REMOVE INBOARD AND OUTBOARD JOINT BOOT CLAMPS
-
Using a boot clamp tool, draw hooks together and remove the clamps.
-
Using side cutters, cut small boot clamps and remove them.
4. DISASSEMBLE INBOARD JOINT
-
Place matchmarks on the inboard joint and drive shaft.