Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
/Page-973009.png)
h. Align the matchmarks on the differential cases.
i.
Using a plastic hammer, carefully tap the differential case to install it.
j.
Using a torx wrench, install and torque the sixteen torx screws.
Torx wrench T50 09042-00040
Torque: 63 N.m (640 kgf-cm, 46 ft-lbf)
2. INSTALL RING GEAR
a. Clean the contact surface of the differential case and the threads of the ring gear and differential case.
b. Hear the ring gear in boiling water.
c. After the moisture on the ring gear has completely evaporated, quickly install the ring gear to the differential case.
HINT: Align the matchmarks on the differential left case and contact the ring gear.