Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
^
Apply grease inside the motor housing see Figure 4.
^
Using holding tool type "A", match the holding tool with the motor housing see Figure 5.
^
Push down on the wire guide and window regulator drum while inserting into motor housing.
[Note:]
If you experience difficulty inserting the window regulator drum into the motor housing, slowly slide the window glass carrier bracket and
align the drive shaft of the motor housing with the window regulator drum.
Type "B" holding tool
^
Apply grease inside the motor housing see Figure 4.
^
Using Holding Tool "B", partially insert the window regulator drum into the motor housing see Figure 6.
^
Remove Holding Tool "B" and push the window regulator drum into the motor housing.
[Note:]
If you are experiencing difficulty inserting the window regulator drum into the motor housing, slowly slide the window glass carrier bracket
and align the drive shaft of the motor housing with the window regulator drum.
^
Apply grease to the sides of the window regulator drum.
2.
INSTALL COVER PLATE.
Screw Type Cover Plate