Camry Wagon V6-2507cc 2.5L DOHC (2VZ-FE) (1988)
Torque: 180 kg.cm (13 ft.lb, 18 N.m)
18. INSTALL ENGINE RH MOUNTING INSULATOR
a. Attach the mounting insulator to the mounting bracket and body. and temporarily install the mounting insulator bolt, four nuts and the
mounting stay bolt (A).
b. Torque the mounting insulator bolt and four nuts. Do not torque the mounting stay bolt (A) yet.
Torque:
Bolt
650 kg.cm (47 ft.lb, 64 N.m)
Nut
To bracket
530 kg.cm (38 ft.lb, 62 N.m)
To body
900 kg.cm (65 ft.lb, 88 N.m)
c. (w/ A.B.S.)
Install the two clamp bolts of the P/S oil cooler pipes.
19. LOWER ENGINE
20. INSTALL ENGINE RH MOUNTING STAYS
a. Install the No.1 mounting stay with the three bolts. Torque the bolts.
Torque: 530 kg.cm (38 ft.lb, 52 N.m)
b. Install the No.2 mounting stay with the bolt and nut. Torque the bolt and nut.
Torque:
Bolt...670 kg.cm (48 ft.lb, 66 N.m)
Nut...530 kg.cm (38 ft.lb, 52 N.m)
21. INSTALL P/S PUMP DRIVE BELT
Adjust the drive belt.
Drive Belt Tension:
New Belt...125 +/- 20 lb.
Old Belt...80 +/- 25 lb.
22. INSTALL ALTERNATOR DRIVE BELT
Adjust the drive belt.
Drive Belt Tension:
New Belt...175 +/- 5 lb.
Old Belt...115 +/- 25 lb.