toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 1892 > < Diagram Information and Instructions|Page 1890
Page 2
background image

g. Using a service wire, short terminals +B and FP of the check connector.

h. Connect the test probes of the SST (wire) to the battery, and check that the fuel spray is as shown.

*SST 09842-30050

CAUTION:  Perform this within the shortest possible time.

2. INSPECT LEAKAGE.

a. In the condition above, disconnect the test probes of SST (wire) from the battery and check fuel leakage from the injector.

*SST 09842-30050

Fuel drop:  One drop or less per minutes

b. Disconnect the battery negative (-) cable.
c. Remove SST and the service wire.

*SST 09268-41045 and 09842-30050

Diagram Information and Instructions|Page 1892 > < Diagram Information and Instructions|Page 1890