toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Ignition Switch and Key Unlock Warning Switch|Page 8064 > < Ignition Switch and Key Unlock Warning Switch|Page 8062
Page 3
background image

f.

Connect the negative (-) lead from the battery to terminal 6.

g. Disconnect the negative (-) lead from the battery to terminal 5.
h. Check that the buzzer stops sounding.

If operation is not as specified, replace the relay.

INSPECT INTEGRATION RELAY (TYPE A) CIRCUIT

a. Remove the relay from the junction block No.1 and inspect the connector on the junction block side.

Ignition Switch and Key Unlock Warning Switch|Page 8064 > < Ignition Switch and Key Unlock Warning Switch|Page 8062