Camry XLE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
4. UNCAULK LOCK PLATES
Using SST to release the caulking, squeeze the handle until stopped by the stopper bolt.
SST 09230-01010
5. REMOVE TANKS AND O-RINGS
Lightly tap the bracket of the radiator (or radiator inlet or outlet) with a soft-faced hammer, and remove the tank and the O-ring.
6. A/T: REMOVE OIL COOLER FROM LOWER TANK
a. Loosen the nut, and remove the cooler pipe.
b. Remove the 2 nuts and plate washers.
c. Remove the oil cooler and 2 O-rings.
REASSEMBLY
1. A/T: INSTALL OIL COOLER TO LOWER TANK
a. Install 2 new O-rings to the oil cooler.
b. Install the oil cooler to the lower tank with the 2 plate washers and nuts.
Torque: 8.3 Nm (85 kgf.cm, 74 inch lbs.)
c. Install the cooler pipe in the direction indicated in the illustration.
Torque: 14.7 Nm (150 kgf.cm, 11 ft. lbs.)