Camry XLE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
Drive Belt: Testing and Inspection
A/C
1. INSPECT DRIVE BELT'S INSTALLATION CONDITION
Check that the drive belt fits properly in the ribbed grooves.
2. INSPECT DRIVE BELT TENSION
Using a belt tension gauge, check the drive belt tension.
Drive belt tension:
New belt: 165 ± 26 lbf
Used belt: 110 ± 11 lbf
HINT:
-
"New belt" refers to a belt which has been used less than 5 minutes on a running engine.
-
"Used belt" refers to a belt which has been used on a runing engine for 5 minutes or more.
-
After installing the drive belt, check that it fits properly in the ribbed grooves.