Camry XLE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
6.
Remove the vacuum hose from Port P of the Vapor Pressure Sensor VSV and connect a hand-held vacuum pump to Port P using a short length of
vacuum hose.
7.
Apply at least 10 mm Hg vacuum to the VSV.
Is a vacuum held for at least 1 minute?
YES --> Go to Step 8.
NO --> Replace the Vapor Pressure Sensor VSV.
8.
Disconnect the hand-held vacuum pump and reconnect the vacuum hose from the canister to the Vapor Pressure Sensor VSV.
9.
Continue diagnosis of the EVAP system.
Reference TSB EG005-01, "EVAP System Operation Information."