Camry XLE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
![background image](/toyota/camry_xle_sedan/l4-2164cc_2.2l_dohc_(5s-fe)_mfi/Page-1570001.png)
Generator: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE REAR END COVER
a. Remove the nut and terminal insulator.
b. Remove the bolt, 3 nuts, plate terminal and end cover.
2. REMOVE BRUSH HOLDER AND VOLTAGE REGULATOR
a. Remove the brush holder cover from the brush holder.
b. Remove the 5 screws, brush holder and voltage regulator.
c. Remove the seal plate from the rectifier end frame.
3. REMOVE RECTIFIER HOLDER
a. Remove the 4 screws and rectifier holder
b. Remove the 4 rubber insulators.
4. REMOVE PULLEY