Camry XLE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
2. Using SST; tighten the nuts to the specified torque.
SST 09810-38140
Torque: 17 Nm (173 kgf.cm, 13 ft.lbf)
NOTE: If the nut is over tightened, it may cause cracks on the inside of the insulator.
h. Clean the contact surfaces of the remaining contact plate and plunger with a dry shop rag.
i.
Reinstall the plunger, a new gasket and the end cover with the 3 bolts.
Torque: 2.5 Nm (26 kgf.cm, 23 in.lbf)