Camry XLE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
HINT: Use a torque wrench with a fulcrum length of 300 mm (11.81 inch).
c. 1MZ-FE Engine:
Using SST, torque the A bolt.
SST 09249-63010
Torque: 29 Nm (293 kgf-cm, 21 ft. lbs.)
HINT:
^
Use a torque wrench with a fulcrum length of 300 mm (11.81 inch).
^
Disconnect the clamp with engine wire.
d. Torque the B bolt.
5S-FE and 1MZ-FE Engines:
Torque: 43 Nm (440 kgf-cm, 32 ft. lbs.)
e. Connect the connector to the oil pressure switch.
NOTICE: Be careful for oil on the connector.
4. CONNECT PRESSURE FEED TUBE