Camry XLE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
9. INSTALL OIL SEAL
a. Coat a new oil seal lip with power steering fluid.
b. Using SST, press in the oil seal.
SST 09612-22011
NOTICE: Make sure to install the oil seal facing the correct direction.
10. INSTALL CONTROL VALVE HOUSING WITH CONTROL VALVE ASSEMBLY
a. Place a new gasket on the rack housing.
b. Align the matchmarks on the valve housing and rack housing.
c. Torque the 2 bolts.
Torque: 18 Nm (185 kgf-cm, 13 ft. lbs.)
11. INSTALL SELF-LOCKING NUT
Using SST to stop the control valve shaft rotating, torque a new nut.
SST 09616-00010
Torque: 25 Nm (250 kgf-cm, 18 ft. lbs.)
12. INSTALL DUST COVER
13. INSTALL RACK HOUSING CAP
a. Apply sealant to 2 or 3 threads of the cap.
Sealant: Part No.08833-00080, THREE BOND 1344, LOCTITE 242 or equivalent
b. Torque the cap.
Torque: 59 Nm (600 kgf-cm, 43 ft. lbs.)
c. Using a punch and hammer, stake the 2 parts of the cap.
14. INSTALL RACK GUIDE SEAT, RACK GUIDE, RACK GUIDE SPRING AND RACK GUIDE SPRING CAP