toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Tightening Specifications|Page 5130 > < Tightening Specifications|Page 5128
Page 2
background image

6. DISCONNECT SOLENOID CONNECTORS

7. REMOVE OIL PIPES

Pry up the both pipe ends with a large screwdriver and remove the 4  pipes.

NOTICE:  Be careful not to bend or damage the pipe.

8. REMOVE VALVE BODY

Remove the 12 bolts.

9. REMOVE THROTTLE CABLE

a. Disconnect the throttle cable.
b. Remove the valve body.

10. REMOVE 2ND BRAKE APPLY GASKET

11. REMOVE SHIFT SOLENOID VALVE NO.1 AND NO.2

a. Remove the 2 bolts and shift solenoid valve No. 1.
b. Remove the bolt and shift solenoid valve No.2.

Tightening Specifications|Page 5130 > < Tightening Specifications|Page 5128