Camry XLE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
c. Holding the clamp near the closing hooks, using pliers, position the holes in the clamp's free end over the closing hooks.
d. Secure clamp by drawing the closing hooks together.
e. Secure the preplaced 3 clamps onto the boots.
f.
Place SST onto the clamp.
SST 09521-24010
g. Tighten the SST so that the clamp is pinched.
NOTICE: Do not overtighten the SST.
h. Using SST, adjust the clearance of the clamp.
SST 09240-00020
Clearance:
A: 1.9 mm (0.075 inch) or less
B: 1.5 - 2.5 mm (0.059 - 0.098 inch)
C: 3.0 - 4.0 mm (0.118 - 0.157 inch)
9. CHECK DRIVE SHAFT