Camry XLE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
_mfi/Page-2334001.png)
Wiper Switch: Testing and Inspection
INSPECT INTERMITTENT OPERATION
a. Turn the wiper switch to INT position.
b. Turn the intermittent time control switch to FAST position.
c. Connect the positive (+) lead from the battery to terminal 16 and the negative (-) lead to terminal 2.
d. Connect the positive (+) lead from the voltmeter to terminal 7 and the negative (-) lead to terminal 2, check that the meter needle indicates battery
positive voltage.
e. After connecting terminal 16 to terminal 17, connect it to terminal 2, check the voltage rises from 0 Volts to battery positive voltage within the
time, as shown in the table.
If operation is not as specified, replace the wiper and washer switch.
