Celica L4-1.8L (2ZZ-GE) (2005)
Paint: Technical Service Bulletins
Paint - Refinishing Bumper Cover
PAINT
PA003-02
REVISED
June 4, 2002
Title
REFINISHING REPLACEMENT BUMPER COVERS
Models
All '83 - '05 Models
TSB REVISION NOTICE:
^ February 14, 2005: Applicable Vehicles now includes 2004 - 2005 model years. Previous versions of this TSB should be discarded.
Introduction
In cases where a bumper cover is being replaced a special preparation process is necessary to assure the refinish is customer acceptable. This bulletin
provides the recommended refinishing procedure for new bumper covers.
Applicable Vehicles
^ All 1983 - 2005 model year Toyota vehicles.
Required Tools & Material
Note:Please visit www.3m.comlautomotive to find the nearest store that sells 3M automotive products.
Warranty Information
Refinishing Procedure
1. Mix a solution of mild soap (car wash soap with no wax additives) and clean water.
Note: Carefully follow mixing instructions on the soap container. Too much soap or too much water may cause surface contamination or rinsing
difficulty.