Celica L4-1.8L (2ZZ-GE) (2005)
3. REMOVE DISC
Release the parking brake lever, and remove the disc.
HINT: If the disc cannot be removed easily, turn the shoe adjuster until the wheel turns freely.
4. REMOVE SHOE RETURN SPRINGS AND TENSION SPRING
Using needle-nose pliers, remove the 2 shoe return springs and tension spring.
5. REMOVE SHOE STRUT
6. REMOVE FRONT SHOE AND ADJUSTER
a. Using SST, remove the shoe hold-down spring and pin from the front shoe.
SST 09718-00010
b. Remove the front shoe and adjuster.
7. REMOVE REAR SHOE
a. Using SST, remove the shoe hold-down spring and pin from the rear shoe.
SST 09718-00010
b. Disconnect the rear shoe from the parking brake shoe lever, and remove rear shoe.
8. REMOVE PARKING BRAKE SHOE LEVER
Using needle-nose pliers, disconnect the parking brake cable from the parking brake shoe lever.
INSPECTION
1. INSPECT DISASSEMBLED PARTS
Inspect the disassembled parts for wear, rust or damage.