Celica L4-1.8L (2ZZ-GE) (2005)
HINT: Each bolt length is indicated in the illustration.
A: 30 mm (1.18 inch)
B: 35 mm (1.38 inch)
2. 2ZZ-GE: INSTALL WATER PUMP
a. Place a new O-ring on the timing chain cover.
b. Install the water pump with the 6 bolts.
Torque: 9.0 Nm (92 kgf-cm, 80 inch lbs.)
HINT: Each bolt length is indicated in the illustration.
A: 30 mm (1.18 inch)
B: 35 mm (1.38 inch)
c. Install the water pump pulley.
d. Using SST, tighten the 4 water pump pulley set bolts.
SST 09960-10010 (09962-01000, 09963-00600)
Torque: 15 Nm (153 kgf-cm, 11 ft. lbs.)
3. INSTALL RH ENGINE UNDER COVER
4. INSTALL DRIVE BELT
5. FILL WITH ENGINE COOLANT
6. START ENGINE AND CHECK FOR LEAKS
7. RECHECK ENGINE COOLANT LEVEL