Celica L4-1.8L (2ZZ-GE) (2005)
Transmission Position Switch/Sensor: Service and Repair
ON-VEHICLE REPAIR
1. REMOVE AIR CLEANER ASSEMBLY
2. DISCONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR
3. REMOVE PARK/NEUTRAL POSITION SWITCH
a. Remove the nut.
b. Remove the nut, washer and control shot lever.
c. Using a screwdriver, pry off the lock plate.
d. Remove the nut and lock plate.
e. Remove the 2 bolts and pull out the park/neutral position switch.
4. INSTALL AND ADJUST PARK/NEUTRAL POSITION SWITCH