Celica L4-1.8L (2ZZ-GE) (2005)
2ZZ-GE:
Intake 0.08 - 0.18 mm (0.0031 - 0.0071 inch)
Exhaust 0.22 - 0.32 mm (0.0087 - 0.0126 inch)
b. Turn the crankshaft 1 revolution (360°) and align the mark as above (See procedure in step 2).
c. Check only the valves indicated as shown. Measure the valve clearance (See procedure in step (a).
4. 1ZZ-FE: ADJUST VALVE CLEARANCE
a. Set the No. 1 cylinder to the TDC/compression (See procedure in step 2).
b. Place matchmarks on the timing chain and camshaft timing sprockets.
c. Remove the 2 bolts and chain tensioner.
d. Remove the camshaft and timing sprocket assemblies.
1. 19 camshaft bearing cap bolts
2. 9 camshaft bearing caps (No. 1 & No. 3)
3. Exhaust camshaft and timing sprocket assembly
4. Intake camshaft and timing sprocket assembly
HINT: When holding the timing chain, disconnect the timing chain from the camshaft timing sprocket.