Celica L4-1.8L (2ZZ-GE) (2005)
Air Bag Control Module: Component Tests and General Diagnostics
Collision / Non-Collision Inspections
INSPECTION
1. VEHICLE NOT INVOLVED IN COLLISION
Do a diagnostic system check.*
2. VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED
Do a diagnostic system check.*
3. VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED
Replace the airbag sensor assembly.*
* Refer to Air Bag Systems; Testing and Inspection.
Replacement Requirements
REPLACEMENT
In the following cases, replace the airbag sensor assembly.
-
If the SRS has been deployed in a collision.
-
If the airbag sensor assembly has been found to be faulty in troubleshooting.
-
If the airbag sensor assembly has been dropped.
CAUTION: Be sure to follow the correct procedure for removal and installation of the airbag sensor assembly.
Collision / Non-Collision Inspections
INSPECTION
1.
VEHICLES NOT INVOLVED IN COLLISION
Do a diagnostic system check.*
2. VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED
Do a diagnostic system check.*
3. VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED
Replace the side airbag sensor assembly.
* Refer to Air Bag Systems; Testing and Inspection.
Replacement Requirements
REPLACEMENT
In the following cases, replace the side airbag sensor assembly.
-
If the side airbag assembly has been deployed in a collision.
-
If the side airbag sensor assembly has been found to be faulty in troubleshooting.
-
If the side airbag sensor assembly has been dropped.
CAUTION: Be sure to follow the correct procedure for removal and installation of the side airbag sensor assembly.