Celica L4-1.8L (2ZZ-GE) (2005)
3. REMOVE STEEL BALL
Using a magnetic finger, remove the steel ball from the clutch shaft hole.
4. REMOVE ARMATURE FROM MAGNETIC SWITCH ASSEMBLY
a. 1ZZ-FE
Remove the armature from the magnetic switch assembly.
b. 2ZZ-GE:
Using a press, remove the armature from the magnetic switch assembly.
REPLACEMENT
1. INSPECT BEARING
Turn the bearing by hand while applying inward force.
If resistance is felt or if the sticks, replace the bearing.
2. REPLACE BEARINGS