Celica L4-1.8L (2ZZ-GE) (2005)
4. REMOVE LOWER POSITION INDICATOR HOUSING
a. Remove the indicator lamp wire sub-assembly.
b. Remove the 4 screws and lower position indicator housing.
c. Remove the bulb cap and bulb from the indicator lamp wire sub-assembly.
d. Remove the screw and indicator lamp wire sub-assembly.
e. Remove the shift lock release button and spring.
5. REMOVE SHIFT LOCK UNIT
Remove the 2 screws and shift lock unit.
6. REMOVE SCREW AND MANUAL DETENT SPRING
7. REMOVE SHIFT LEVER SUB-ASSEMBLY
Using a screwdriver and hammer, drive off the shaft control while disengaging the claw of the shaft control and remove the shift lever
sub-assembly.