Celica L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1990)
Axle Shaft: Service and Repair
Axle Shaft Assembly, Constant Velocity Type
Precautionary Note
The axle hub bearing could be damaged if it is subjected to vehicle weight, as when moving the vehicle with the driveshaft removed. If it is
absolutely necessary to move the vehicle with the driveshaft removed, support axle hub bearing using tool 09608-16041 or equivalent.
Removal
Fig. 10 Exploded View Of AWD Front Driveshaft Components.
1.
Remove front wheels.
2.
Remove cotter pin, locknut cap and locknut.
3.
Disconnect tie rod ends.
4.
Disconnect steering knuckle from lower arm.
5.
Drain gear oil.
6.
Place alignment marks on the driveshaft and side gear shaft.
7.
Loosen six hexagon bolts while depressing brake pedal.