Celica 2WD L4-2.0L (3S-FE) (1988)
(b)
Remove the screw.
(c)
Disconnect the connector and remove the bracket and reinforcement as assembly.
16.-1 REMOVE LOWER CENTER DASH PANEL (ST)
(a)
Remove the ash tray.
(b)
Remove the eight screws.
IMPORTANT
(c)
Cover the shift position upper housing with a clean shop rag.
(d)
Disconnect the connectors and remove the panel.
16.-2 REMOVE LOWER CENTER DASH PANEL (GT, GT-S AND TURBO ALL-TRAC)
(a)
Remove the ash tray.
(b)
Remove the six screws.
IMPORTANT
(c)
Cover the shift position upper housing with a clean shop rag.