Celica 2WD L4-2.0L (3S-FE) (1988)
Timing Belt: Service and Repair
TIMING BELT REPLACEMENT
CAUTION:
^
Do not bend, twist or turn the timing belt inside out.
^
Do not allow the timing belt to come into contact with oil, water or steam.
^
Do not utilize timing belt tension when installing or removing the mount bolt of the camshaft timing pulley.
REMOVAL OF TIMING BELT
1. Disconnect cable from negative terminal of battery.
2. Remove RH front wheel.
3. Remove engine RH under cover.
4. On vehicles with cruise control system, remove cruise control actuator.
5. Remove drive belts.
6. Remove alternator and alternator bracket.
7. With a jack, slightly raise the engine enough to remove the weight from the engine mounting on the right side.