Celica 2WD L4-2.0L (3S-FE) (1988)
![background image](/toyota/celica_2wd/l4-2.0l_(3s-fe)/Page-656002.png)
5. REMOVE ONE-WAY CLUTCH FROM OUTER RACE
ASSEMBLY OF ONE-WAY CLUTCH
1. INSTALL ONE-WAY CLUTCH
Install the one-way clutch into the outer race, facing the flanged side of the one-way clutch inward from the shiny side of the outer race.
2. INSTALL BOTH RETAINERS AND TWO SNAP RINGS
3. INSTALL REAR PLANETARY GEAR INTO ONE-WAY CLUTCH
Install the planetary gear into the one-way clutch, facing the inner race of planetary gear inward from the black side of the outer race.
4. CHECK OPERATION OF ONE-WAY CLUTCH
5. INSTALL NO. 2 PLANETARY CARRIER THRUST WASHERS ONTO BOTH SIDES OF CARRIER
a. Coat the thrust washers with petroleum jelly.
b. Align the tab of the washers with the hollow of the carrier.