Celica 2WD L4-2.0L (3S-FE) (1988)
6. REMOVE THE FOUR PLUGS WITH MAGNETIC FINGER
NOTE: Be careful not to lose them.
ASSEMBLY OF OVERDRIVE ONE-WAY CLUTCH
1. INSTALL THE FOUR PLUGS INTO HOLE OF PINION SHAFT
2. INSTALL NO.3 OVERDRIVE PLANETARY THRUST WASHER
Install the thrust washer, facing the groove toward the over drive case.
3. ASSEMBLE OVERDRIVE ONE-WAY CLUTCH
a. Install the one-way clutch into the outer race.
b. Install a retainer on both sides of the one- way clutch