Celica 2WD L4-2.0L (3S-FE) (1988)
/Page-672001.png)
Planetary Gears: Service and Repair
No.2 One-way Clutch And Rear Planetary Gear
No.2 One-Way Clutch And Rear Planetary Gear
COMPONENTS
DISASSEMBLY OF ONE-WAY CLUTCH
1. CHECK OPERATION OF ONE-WAY CLUTCH
Hold the outer race and turn the hub.
The hub should turn freely counterclockwise and should lock clockwise.
2. REMOVE NO. 2 PLANETARY CARRIER THRUST WASHERS FROM BOTH SIDES OF CARRIER
3. DISASSEMBLE ONE-WAY CLUTCH
Remove the hub and the planetary gear from the one-way clutch.
4. REMOVE BOTH SIDE SNAP RINGS AND TWO SIDE RETAINERS