Celica 2WD L4-2.0L (3S-FE) (1988)
/Page-678002.png)
a. Remove the oil seal with a screwdriver.
b. Drive in a new oil seal.
c. Apply MP grease to the oil seal lip.
INSTALLATION OF MANUAL VALVE LEVER AND SHAFT
1. INSTALL MANUAL VALVE SHAFT INTO CASE
a. Assemble a new collar to the manual valve lever.
b. Install the manual valve shaft to the transmission case through the manual valve lever.
c. Drive in the roll pin with the slot at a right angle to the shaft.
