Celica GT-S L4-1.8L (2ZZ-GE) (2000)
/Page-1316002.png)
Applying position of the Seal to roof panel top surface - 1.5 mm (See Figure 1).
a.
Keep the Sliding Roof Seal lightly stretched when applying it.
Do not, however, stretch the Sliding Roof Seal when applying it to the corner of the roof panel.
b.
Cut the Sliding Roof Seal so that the gap will be 10 mm or less and the ends may not overlap (See Figure 2).
c.
Press the Sliding Roof Seal to let the air out of it.
3.
Clean the outside of the moon roof weatherstrip.
