Celica GT-S L4-1.8L (2ZZ-GE) (2000)
HINT: Put aside the pump and suspend it to the cowl with a string.
7. REMOVE RIGHT-HAND ENGINE MOUNTING INSULATOR
a. Set the jack to the engine.
HINT: Place a wooden block between the jack and engine.
b. 1ZZ-FE: Remove the 4 bolts, 2 nuts and Right-Hand engine mounting insulator.
c. 2ZZ-GE: Remove the 5 bolts, 2 nuts and Right-Hand engine mounting insulator.
8. 1ZZ-FE: REMOVE CYLINDER HEAD COVER
a. Remove the 4 bolts and No. 2 cylinder head cover.
b. Remove the 4 ignition coils.
c. Disconnect the 2 PCV hoses from the cylinder head.
d. Remove the 9 bolts, 2 seal washers, 2 nuts, cylinder head cover and gasket.
9. 2ZZ-GE: REMOVE CYLINDER HEAD COVER
a. Remove the 4 bolts and No. 2 cylinder head cover.
b. Remove the ignition coils.
c. Disconnect the 2 PCV hoses from the cylinder head cover.