Celica GT-S L4-1.8L (2ZZ-GE) (2000)
/Page-375016.png)
e. Install the timing chain cover, O-ring and water pump with the 19 bolts. Uniformly tighten the bolts in several passes.
Torque:
A: 21 Nm (214 kgf-cm, 15 ft. lbs.)
B: 11 Nm (113 kgf-cm, 8 ft. lbs.)
C: 9.0 Nm (92 kgf-cm, 80 inch lbs.)
D: 9.0 Nm (92 kgf-cm, 80 inch lbs.)
NOTICE:
-
Pay attention not to wrap the chain and slipper over the chain cover seal line.
-
After install the chain cover, must install the mounting bracket and water pump within 15 minutes.
f.
Using a torx wrench socket (E8), install the stud bolt.
Torque: 9.3 Nm (95 kgf-cm, 82 inch lbs.)
9. 1ZZ-FE: INSTALL RIGHT-HAND ENGINE MOUNTING BRACKET
a. Apply seal packing to threads of the mounting bolt.
Seal packing:Part No. 08826-00080 or equivalent
HINT: Do not apply seal packing to 2 or 3 threads of the bolt end.
b. Install the mounting bracket with the 3 bolts.
Torque: 47 Nm (479 kgf-cm, 35 ft. lbs.)
10. 2ZZ-GE: INSTALL RIGHT-HAND ENGINE MOUNTING BRACKET
Install the mounting bracket with the 4 bolts.
Torque: 49 Nm (500 kgf-cm, 36 ft. lbs.)
11. INSTALL DRIVE BELT TENSIONER
a. Check the appearance before installing the drive belt tensioner.
If in case of having the oil leakage, crack, and etc., replace the drive belt tensioner.
b. Install the drive belt tensioner.
Torque:
Bolt:
1ZZ-FE: 690 Nm (704 kgf-cm, 51 ft. lbs.)
2ZZ-GE: 100 Nm (1,020 kgf-cm, 74 ft. lbs.)
Nut: 29 Nm (296 kgf-cm, 21 ft. lbs.)
c. Hook the tool on the hexagonal portion of the drive belt tensioner bracket and operate drive belt tensioner 3 times with full stroke.
HINT: Take 3 seconds or more for 1 full stroke.
