Celica GT-S L4-1.8L (2ZZ-GE) (2000)
1. Never reuse the O-ring.
2. When placing a new O-ring on the injector, take care not to damage it in any way.
3. Coat a new O-Ring with spindle oil or gasoline before installing never use engine, gear or brake oil.
C. Install the injector to the delivery pipe and cylinder head, as shown in the illustration. Before in installing the injector, must apply spindle oil or
gasoline on the place where a delivery pipe or a cylinder head touches on O-ring of the injector.
D. Observe these precautions when disconnecting the fuel delivery pipe. The structure of the metallic connector is shown as left.
1. Remove the fuel pipe clamp.
2. Get the metallic connector of the fuel tube assembly, pull it out towards the rear and hold it as it is.
3. Assemble SST to the connection as shown.
SST 09628-21010