toyota Workshop Repair Guides

Toyota Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 2
background image

WARRANTY INFORMATION

PROGRAMMING PROCEDURE

AUTOMATIC (IGNITION-CONTROLLED) DOOR LOCKING/UNLOCKING FUNCTION

The factory setting for the AUTOMATIC DOOR LOCKING/UNLOCkING FUNCTION is "ON".

To change this feature's operation, follow the steps below:

1.

Sit in the driver's seat with driver's door open.

2.

Insert the key into the ignition switch, and turn it to 'ON" position (not "ACC") 5 times (ON > LOCK > ON > LOCK> ON > LOCK > ON>
LOCK > ON) within a 10 second period.

System Response: The STATUS MONITOR's LED turns on, and the PIEZO BUZZER sounds once.

NOTE: 
You must perform the next steps within 30 seconds.

3.

Select the customer's preferred operating mode.

Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Alarm Module, (Vehicle Antitheft) > Component Information > Technical Service Bulletins > Antitheft - Automatic Door Lock Feature Programming > Page 8

< PREV PAGE NEXT PAGE >