Celica GT-S L4-1.8L (2ZZ-GE) (2000)
Vehicle Speed Sensor: Service and Repair
ON-VEHICLE REPAIR
1. REMOVE BATTERY
2. REMOVE ECM AND ECM CASE
3. REMOVE ECM BRACKET
4. DISCONNECT VEHICLE SPEED SENSOR CONNECTOR
5. REMOVE VEHICLE SPEED SENSOR ASSEMBLY
a) Remove the bolt and vehicle speed sensor assembly.
b) Remove the clip and speedometer driven gear from the vehicle speed sensor.
c) Remove the O-ring from the vehicle speed sensor.
6. INSTALL VEHICLE SPEED SENSOR ASSEMBLY
a) Coat a new O-ring with ATF and install it to the vehicle speed sensor.
b) Install the speedometer driven gear to the vehicle speed sensor with clip.
c) Install the vehicle speed sensor assembly with the bolt.
Torque: 5.5 Nm (56 kgf-cm, 49 inch lbs.)
7. CONNECT VEHICLE SPEED SENSOR CONNECTOR
8. INSTALL ECM BRACKET
Torque:
Bolt: 18 Nm (185 kgf-cm, 13 ft. lbs.)
Nut: 12 Nm (120 kgf-cm, 9 ft. lbs.)
9. INSTALL ECM AND ECM CASE
Torque: 6.9 Nm (70 kgf-cm, 61 inch lbs.)
10. INSTALL BATTERY