Celica GT-S L4-1.8L (2ZZ-GE) (2000)
HINT: Try to adjust the camber and toe-in to the center of the specified values.
e. Torque the upper and lower arm adjusting cam set nuts.
Torque: 74 Nm (755 kgf.cm, 55 ft. lbs.)
6. HOW TO READ ADJUSTMENT CHART (EXAMPLE)
a. Measure the present alignment.
Example:
Camber (RH): -0° 26'(-0.43°)
Camber (LH): -1° 56' (-1.93°)
Toe-in (total): IN 7 mm (0.28 inch)
b. Mark the difference between the standard value (A) and the measured value (B) on the adjustment chart.
Standard value:
Camber: -1° 11' (-1.18°)
Toe-in (total): IN 3 mm (0.12 inch)
Formula: A - B = C
Camber (RH): -1° 11' - (-0° 26') = -0° 45'
Camber (LH): -1° 11' - (-1° 56') = 0° 045'
Toe-in (total): IN3 - IN7 = OUT 4
Toe-in (each side): OUT 2