Celica GT L4-1.8L (1ZZ-FE) (2001)
A.
Disconnect the throttle position sensor connector.
B.
Disconnect the IAC valve connector.
C.
Disconnect the PCV hose from the throttle body.
D.
Disconnect the 2 water bypass hoses.
E.
Disconnect the EVAP hose for ORVR.
F.
Disconnect the brake booster vacuum hose.
G.
Remove the 4 bolts, 2 nuts, intake manifold, 2 wire harness stays, and gasket.
5.
Clean the mounting surface of the intake manifold.
6.
Install the intake manifold.
A.
Install a NEW gasket, 2 wire harness stays and the intake manifold with the 4 bolts and 2 nuts. Uniformly tighten the bolts and nuts in