Celica GT L4-1.8L (1ZZ-FE) (2001)
/Page-1060001.png)
Blower Motor Resistor: Testing and Inspection
BLOWER RESISTOR INSPECTION
1. REMOVE BLOWER RESISTOR
a. Disconnect the connector.
b. Remove the 2 screws and the blower resistor.
2. INSPECT BLOWER RESISTOR CONTINUITY
If continuity is not as specified, replace the blower resistor.
3. INSTALL BLOWER RESISTOR
a. Install the blower resistor and 2 screws.
b. Connect the connector.