toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Knock Sensor > < Diagram Information and Instructions|Page 2150
Page 1
background image

Information Bus: Initial Inspection and Diagnostic Overview

BODY ECU

3 - GROUND : Approx. 12 volts with ignition SW at ON or ST position.
8 - GROUND : Always approx. 12 volts.
5 - GROUND : Always approx. 12 volts.
11 - GROUND: Always continuity.
12 - GROUND: Approx. 12 volts with ignition SW at ACC or ON position.

Knock Sensor > < Diagram Information and Instructions|Page 2150