toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Malfunction Lamp / Indicator, Air Bag > < Side Airbag Connectors|Page 4510
Page 12
background image

CAUTION:
-

The side airbag assembly is very hot when the airbag is deployed, so leave it alone for at least 30 minutes after deployment.

-

Use gloves and safety glasses when handling a side airbag assembly with the deployed airbag.

-

Do not apply water etc. to a side airbag assembly with the deployed airbag.

-

Always wash your hands with water after completing the operation.

1. Remove the side airbag assembly from the tire.
2. Place the side airbag assembly in a vinyl bag, tie the end tightly and dispose of it in the same way as other general parts disposal

Disposing of Side Airbag Assembly With Airbag Deployed

DISPOSAL

HINT:  When scrapping vehicle equipped with an SRS or disposing of a steering wheel pad (with airbag), always first deploy the air-bag in accordance
with the procedure described below. If any abnormality occurs with the airbag deployment, contact the SERVICE DEPT of TOYOTA MOTOR SALES,
U.S.A., INC.

CAUTION:

-

Never dispose of a steering wheel pad which has an undeployed airbag.

-

The airbag produces a sizeable exploding sound when it deploys, so perform the operation out-of-doors and where it will not create a nuisance to
nearby residents.

-

When deploying the airbag, always use the specified SST (SRS Airbag Deployment Tool) Perform the operation in a place away from electrical
noise.
SST 09082-00700

-

When deploying an airbag, perform the operation at least 10 m (33 ft) away from the steering wheel pad.

-

The steering wheel pad is very hot when the airbag is deployed, so leave it alone for at least 30 minutes after deployment.

-

Use gloves and safety glasses when handling a steering wheel pad with the deployed airbag.

-

Always wash your hands with water after completing the operation.

-

Do not apply water, etc. to a steering wheel pad with the deployed airbag.

DEPLOYMENT WHEN DISPOSING OF SIDE AIRBAG ASSEMBLY WITH AIRBAG DEPLOYED IN COLLISION

Dispose of the side airbag assembly.

CAUTION:

-

The side airbag assembly is very hot when the airbag is deployed, so leave it alone for at least 30 minutes after deployment.

-

Use gloves and safety glasses when handling a side airbag assembly with the deployed airbag.

-

Do not apply water etc. to a side airbag assembly with the deployed airbag.

-

Always wash your hands with water after completing the operation.

1. Remove the side airbag assembly from the seat (See DEPLOYMENT WHEN DISPOSING OF SIDE AIRBAG ASSEMBLY).
2. Place the side airbag assembly in a vinyl bag, tie the end tightly and dispose of it in the same way as other general parts disposal.

Malfunction Lamp / Indicator, Air Bag > < Side Airbag Connectors|Page 4510