Celica GT L4-1.8L (1ZZ-FE) (2001)
Seat Belt Tensioner: Component Tests and General Diagnostics
Collision / Non-Collision Inspections
INSPECTION
1. PRETENSIONER IS NOT ACTIVATED
a. Perform a diagnostic system check.
b. Perform a visual check which includes the following items with the front seat outer belt removed from the vehicle.
-
Check for cuts and cracks in, or marked discoloration on the quarter trim panel.
-
Check for cuts and cracks in wire harness, and for chipping in connectors.
-
Check for deformation of the quarter panel.
CAUTION: For removal and installation of the front seat outer belt
2. PRETENSIONER IS ACTIVATED
a. Perform a diagnostic system check.
b. Perform a visual check which includes the following items with the front seat outer belt removed from the vehicle.
-
Check for deformation of the quarter panel.
-
Check for damage on the connector and wire harness.
Component Inspection
INSPECTION
1. INSPECT TENSION REDUCER SOLENOID OPERATION