Celica GT L4-1.8L (1ZZ-FE) (2001)
/Page-1003009.png)
(c) Expand a new teflon ring with your fingers.
NOTICE: Be careful not to overexpand the teflon ring.
(d) Coat the teflon ring with power steering fluid.
(e) Install the teflon ring to the steering rack and settle it down with your fingers.
7. IF NECESSARY, REPLACE 4 TEFLON RINGS
(a) Using a screwdriver, remove the 4 teflon rings from the control valve assembly.
NOTICE: Be careful not to damage the grooves for the teflon rings.
(b) Expand 4 new teflon rings with your fingers.
NOTICE: Be careful not to overexpand the teflon ring.
(c) Coat the teflon rings with power steering fluid.
(d) Install the teflon rings to the control valve assembly and settle them down with your fingers.
(e) Carefully slide the tapered end of SST over the teflon rings until they fit to the control valve assembly.
SST 09631-20081
NOTICE: Be careful not to damage the teflon rings.
REASSEMBLY
