Celica GT L4-1.8L (1ZZ-FE) (2001)
/Page-1018002.png)
1. INSTALL LOWER BALL JOINT
(a) Install the lower ball joint and tighten the nut.
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
(b) Install a new cotter pin.
If the holes for the cotter pin are not aligned, tighten the nut further up to 60°.
2. INSTALL STEERING KNUCKLE WITH AXLE HUB
3. CHECK ABS SPEED SENSOR SIGNAL
4. CHECK FRONT WHEEL ALIGNMENT
