toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Glass - Windshield and Fixed Glass Bonding|Page 5827 > < Glass - Windshield and Fixed Glass Bonding|Page 5825
Page 2
background image

6. REMOVE INNER REAR VIEW MIRROR

Remove the inner rear view mirror as shown in the illustration.

7. REMOVE WIPER ARMS

Remove the 2 wiper arm head caps, 2 nuts and 2 wiper arms.

8. REMOVE HOOD TO COWL TOP SEAL
9. REMOVE COWL TOP VENTILATOR LOUVER

a. Remove the 4 screws and 6 clips.
b. Using a screwdriver, remove the cowl top ventilator louver, then disconnect the washer hoses.

HINT:  Tape the screwdriver tip before use.

10. w/ Sliding roof:

REMOVE SLIDING ROOF OPENING TRIM

11. PULL DOWN FRONT PART OF ROOF HEADLINING
12. REMOVE WINDSHIELD OUTSIDE MOULDING

a. Using a knife, cut off the moulding as shown in the illustration.

NOTE:  Do not damage the body with the knife.

b. Remove the remaining moulding.

13. REMOVE WINDSHIELD GLASS

Glass - Windshield and Fixed Glass Bonding|Page 5827 > < Glass - Windshield and Fixed Glass Bonding|Page 5825